Cancelling A Goto - Garmin eTrex eTrex Owner's Manual

The destination name, distance to the destination and
time to reach your destination are displayed at the top of
the screen. The speed you are traveling is shown at the
bottom of the screen. Once you are getting close to your
destination, the eTrex will give you the message "ARRIV-
ING DESTINATION".

Cancelling A GOTO

Anytime you want to stop a GOTO:
1. Press the PAGE Button and switch to the 'POINTER'
Page. Press ENTER.
2. Highlight 'STOP NAVIGATION' on the 'OPTIONS'
Page and press ENTER.
Clearing a Cluttered Map Display
After you've used the eTrex for a few trips, the map
display will become a bit messy from keeping track of
your every move. You can clean up the screen by clearing
the track log (the lines left on the Map Page):
To clear the track log:
1. Press the PAGE Button and switch to the 'MENU'
Page.
Press the UP or DOWN Button and highlight
2.
'TRACKS'.
Press ENTER. You are now on the 'TRACK LOG'
3.
Page. Use the UP Button and highlight 'CLEAR'.
Press ENTER.
Use the DOWN Button and highlight 'YES'.
4.
Press the PAGE Button to select any
ENTER.
page.
You've now gone through the basic operation of the
eTrex and you're ready to get out there and have some
fun! To turn the eTrex off, press and hold the POWER
Button.
Getting
You've Made It!
Highlight STOP
NAVIGATION and press
ENTER on the Options
Page to stop a GOTO.
Press
Clear the Track Log
when the Map Page
gets too cluttered.
Started
17