Table of Contents
Advertisement
NOTE ON LEADING THE WIRE (FLAT TYPE) (9 CORE)
Lead the wire (flat type) (9 core) properly to prevent the wire from coming out from the right side of the guides on the sub panel or sagging
inside of the lid.
guides
wire (flat type) (9 core)
NOTE ON INSTALLING THE HP BOARD
Note: Follow the assembly procedure in the numerical order given.
lid (TC)
sub panel
2 HP board
3 three screws
×
(BVTP2.6
8)
1 Lead the cable trough out
the ditch of the HP board
to prevent the cable from
contacting with the CD
mechanism deck.
HP board
cable
ditch
HCD-CPX1
5
Advertisement
Table of Contents
