Intense Cycles 951 Series Manual page 5

N E E D H E L P ?
DO NOT RETURN TO THE STORE
call us at: +1 951.307.9211
or email: info@intensecycles.com
our rider support team looks forward
to helping with any questions.
INTENSE 951 XC
SETUP GUIDE
Your new 951 XC is almost ready to go, you just need to do a few things to get your bike ready for the
ride. Over the next few pages we'll show you how to assemble your bike. After that, you'll set your
saddle height, suspension, and check your tire pressure to ensure a great first ride.
We have a series of in-depth and detailed videos on our website that go through the whole process of
building and preparing your bike – including technical videos on suspension set-up, tuning your gears,
and much more.
GO TO INTENSE951.COM/PAGES/TECHVIDEOS
When we talk about the drive-side of your bike we are talking about the side that has the chain and
gearing on it. If you were sitting on your bike facing forward this would be the right-hand side. The
left-hand side of the bike is known as the non-drive side.
If you own a bike stand, great – just extend the dropper seatpost to its full height (Step 3) and put the
bike in the stand. Only use the seatpost to clamp the bike to the stand. For those of you who don't
have a bike stand you can use the box the bike came in to help you assemble your bike as outlined
over the following pages.
WE ARE HERE TO HELP!
If at any time you feel unsure about what you are doing then please contact us at:
INTENSE +1 951.307.9211
www. in t en s e95 1. c o m
9