Table of Contents
Advertisement
Gas Skillets
Daily Shutdown Procedure
1. To turn tilting braising pan of, turn THERMOSTAT dial to OFF.
2. To turn power to tilt motor OFF, turn power switch to OFF.
Tilting the Braising Pan
1. DO NOT try to tilt braising pan with lid down. Turn MOTOR switch on.
2. Make sure the receiving pan is in place.
3. To tilt braising pan, push and hold TILT SWITCH in the UP mode until desired pan position has been reached. The
braising pan will empty when raised to the top tilt position.
When the braising pan is raised 5̊ or more, the gas supply will be turned off automatically. The braising pan will not
operate when the pan is not in the horizontal or down position.
4. Food is poured through the removable strainer (Figure 1) into a food receiving pan positioned under the lip of the
pouring spout (Figure 1).
5. To lower braising pan, push and hold TILT SWITCH in the DOWN mode.
When tilting mechanism is not in use, turn MOTOR switch off.
FIGURE 1
INSTALLATION & OPERATION MANUAL 10094 REV 0 (08/21)
Operation
9
PAGE
OF24
Advertisement
Table of Contents
