Dry Ironing; Self-Cleaning - Champion CHSJ215 User Manual

Dry ironing

To iron without steam, follow the instructions in section "steam ironing", leaving the steam selector
(4) on position "min".
Spray Function
1. Make sure that there is water in the reservoir. Press the spray button (6) slowly (for a dense
spray) or quickly (for a vaporized spray) [Fig. 6].
Warning:
For delicate fabrics, we recommend moistening the fabric beforehand using the spray function (6)
or putting a damp cloth between the iron and the fabric. To avoid staining, do not use the spray on
silk or synthetic fabrics.
Cleaning
Note:
• Before cleaning the iron in any way, make sure that the appliance plug is not connected to the
socket.
• Any deposits, starch residue or size left on the plate can be removed using a damp cloth or an
abrasive liquid detergent.
• Avoid scratching the plate with steel wool or metallic objects.
• The plastic parts can be cleaned with a damp cloth then wiped over with a dry cloth.

Self-cleaning

The self-cleaning feature cleans inside the plate, removing impurities. We recommend using it
every 10-15 days. Directions:
1. Fill the reservoir up to the maximum level indicated and set the steam selector (4) to the close
gear. [Fig. 1]
2. Set the thermostat knob (13) to the maximum temperature and wait for the light to turn off.
3. Set the steam selector (4) to the self-cleaning gear, and it will automatically popup, then begin
to clean the soleplate (1). [Fig. 7]
4. Pull the plug out of the socket and hold the iron horizontally over the sink.
5. Set the steam selector (4) to the close gear until all the boiling water, steam, impurities come
out.
6. When the soleplate has cooled down, you can clean it with a damp cloth.
EN
4