Pași
1. Insert the camera into the slot on the display back cover .
2. Connect the camera cable to the connector and adhere the adhesive tape above the camera connector.
3. Affix the two conductive tape above the camera module.
Pașii următori
1. Install the
display
panel.
2. Install the
display hinge
3. Install the
display
bezel.
4. Install the
display
assembly.
5. Install the battery.
6. Install the
base
cover.
7. Follow the procedure in
Ansamblul zonei de sprijin pentru mâini
Replacing the palmrest assembly
Cerințe preliminare
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
2280 SATA
5. Remove the memory.
6. Remove the
WLAN
card.
7. Remove the
WWAN
card.
8. Remove the
inner
frame.
9. Remove the
LED
board.
10. Remove the DC-in.
11. Remove the
system
board.
NOTIFICARE: System board can be removed with heatsink attached.
caps.
After working inside your
computer.
Before working inside your
SSD.
computer.
Dezasamblarea și reasamblarea
83