4. Align and place the heatsink assembly into the slot.
5. Replace the seven (M2x3) screws to secure the heatsink assembly to the system board.
6. Connect the heatsink fan cable to the connector on the system board.
Pașii următori
1. Install the
inner frame
2. Install the battery.
3. Install the
base
cover.
4. Follow the procedure in
Portul de intrare c.c.
Removing the DC-in
Cerințe preliminare
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the heatsink-discrete.
Despre această sarcină
The figure indicates the location of the DC-in and provides a visual representation of the removal procedure.
After working inside your
computer.
Before working inside your
computer.
Dezasamblarea și reasamblarea
37