Flight Mode（Flight Modes; Global Variables（Global Variables - RadioMaster Zorro Instruction Manual

3.4.2 Flight Mode（Flight Modes）
The flight mode allows you to set the corresponding fine-tuning value for a specific mission or
flight behavior. This item is mainly used for fixed-wing gliders to use different fine-tuning values
in different environments. You can customize the fine-tuning value of 1-6 channels, and you can
set it for each flight. Mode setting smooth slow-in slow-down time.
There are 8 flight modes plus the default FM0 available. The first item of FM1-FM8 requires a
trigger switch. When no switch is on, FM0 is enabled by default.
Mode name
Trims
Fade in
Fade Out
CFM0k trim
3.4.3. Global variables（Global Variables）
Global variables are customizable values that can be used as temporary values for custom
operations. In complex functions, the values of global variables are automatically modified
through certain trigger conditions for conditional judgment or any other purpose. Global
Variables can be used as input or output real-time adjustment parameters, and can also be used
as parameters in flight mode and curve definition. Global variables can be used in any place
where numerical values can be entered to achieve some automated control.
Define a name for the flight mode
Adjust the fine-tuning value of 1-6 channels according to your
actual needs
Slow Ease In / Ease Out Time Settings
At the bottom of the screen (below FM8) you are reminded to
check the fine-tuning of each flight mode. According to the
currently selected FM number, the corresponding reminder
message is displayed, for example, if the flight mode FM2 is
active, it will display "CFM2k trim"