Installing/Removing Batteries Into/From Battery Boxes - Invacare 3G Storm Series Owner's Operator And Maintenance Manual

FOR WHEELCHAIRS THAT USE GP24 BATTERIES
Batteries with terminal configuration (POSITIVE on the right and NEGATIVE on
the left) as shown below MUST be used. Batteries that have the reverse terminal
configuration MUST not be used - otherwise injury and damage may occur.
Terminals MUST have a cross hole in them as shown in Detail "A" below.
NEGATIVE (+) Battery
Terminal/Post

Installing/Removing Batteries Into/From Battery Boxes

NOTE: For this procedure, refer to FIGURE 10.1 on page 90.
NOTE: To remove the battery(ies) from the battery box(es), reverse the following steps.
NOTE: Have the following tools available:
• Battery Lifting Strap
• 1/2-inch (6 pt) Box Wrench
Part No 1134791
All manuals and user guides at all-guides.com
WARNING
POSITIVE (+) Battery
Terminal/Post
GP24
DETAIL "A" - TERMINAL CROSS HOLES
89
SECTION 10—BATTERIES
POSITIVE (+) Battery
Terminal/Post
NEGATIVE (+) Battery
Terminal/Post
GP24
DO NOT Use
Terminal Cross Holes
3G Storm Series® Wheelchairs