Checking The Valve Seats - Yamaha MX250 Service Manual

VALVE
a
a
Installed compression spring force (Intake):
Installed compression spring force (Exhaust):
Installed length (Intake):
Installed length (Exhaust):
6.
Measure:
• Valve spring tilt "a"
Tilt limit:
Out of specifications  Replace.
7.
Check:
• Valve spring contact surface "a"
a
More than 2/3 of the contact surface does not con-
tact  Replace.

CHECKING THE VALVE SEATS

The following procedure applies to all of the valves and
valve seats.
1.
Remove carbon deposits from the valve face and
valve seat.
2.
Apply a small amount of coarse mechanic's blue lay-
out fluid to the valve face "a".
3-29
91.20–104.93 N (9.12–10.49 kgf, 20.50–23.59
lbf)
91.20–104.93 N (9.12–10.49 kgf, 20.50–23.59
lbf)
29.0 mm (1.1417 in)
29.0 mm (1.1417 in)
1.7 mm (0.0669 in)
1
2
3
4
5
6
7
8
9
10