GeekChef CJ-265E User Manual page 16

1. Rotate the knob to coffee position. Press the steam button for more than
5 seconds. The unit will start the descaling of coffee brewing system for 5
minutes. During the descaling, the button lights of single cup, double cup
and steam will flash once one by one. When the cycle is finished, the
buttons of single cup, double cup and steam will flash simultaneously.
2. Rotate the knob back to steam position to start the descaling of steam
system. During the descaling, the button lights of single cup, double cup
and steam will flash once one by one. The cycle will takes 5 min and when
it finishes, lights of single cup button and double cup button will flash one
by one, and steam button light will be on. This means the descaling completes.
Step 2
Pour out the mixture of detergent from the water tank. Add fresh water into
the water tank to max mark, and put water tank back to the unit.
1. Rotate the knob back to steam position, press the steam button to start the
steam system cleaning. The button lights of single cup, double cup and
steam will flash twice one by one. The cycle will take 1 min. When it finishes,
the button lights of single cup, double cup and steam flash simultaneously.
2. Rotate the knob back to coffee function to start again the cleaning of coffee
brewing system. The button lights of single cup, double cup and steam will
flash twice one by one. The cycle will take 1 min. When it finishes, the unit will
enter pre-heating mode.
15