Immobilizer Device Enabled Indicator Led; Operation - VESPA LX 125ie 3Valvole Manual

Immobilizer device enabled indicator led (01_14)

Activation of the «PIAGGIO IMMOBILIZER» system is signalled by a flashing warning
light «U» (see «Analogue instrument panel» section).
In order to reduce battery discharge, the indicator LED turns off automatically after 48
hours of uninterrupted functioning.
Should the system fail, different LED flashing patterns will be provided by an Author-
ised Piaggio Service Centre with information on the type of fault detected.
01_14

Operation

Every time the starter key is removed in the "OFF" or "LOCK" position, the safety
system activates the immobilizer system. Turning the key to "ON" disables the engine
lock, provided that the safety system recognises the code transmitted by the key. If
the code is not recognised, turn the key first to "OFF" and then to "ON"; if the lock
cannot be disabled, try with the other key supplied (red-coloured). If the engine cannot
be started, contact an Authorised Piaggio Service Centre, which is provided with
the electronic equipment required to detect and repair the system. The Immobilizer is
also activated by switching off the engine with the RUN OFF switch. This happens
even if the starter key is in «ON».
When additional keys are required, please note that data storage (up to 3 keys max.)
must be done on all keys, both new ones and existing ones. Take your scooter to an
Authorised Piaggio Service Centre carrying with you the red-handgrip key and all
the blue keys in your possession. The codes of keys not submitted for the new pro-
gramming procedure are deleted from the memory. Any lost keys will therefore not be
enabled to start the engine.
WARNING
EACH KEY HAS ITS OWN AND UNIQUE CODE, WHICH MUST BE STORED IN
THE SYSTEM CONTROL UNIT MEMORY.
17