Advertisement
Operation Manual
Manual Pipe Bender
62534
Illustration similar, may vary depending on model
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further
developments.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for WilTec 62534
Summary of Contents for WilTec 62534
- Page 1 Operation Manual Manual Pipe Bender 62534 Illustration similar, may vary depending on model Please read and follow the operating instructions and safety information prior to initial operation. Technical changes reserved! Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further...
- Page 2 The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man- ual, nor in the diagrams and illustrations shown.
- Page 3 First install the bending tool before using it. Check all parts for completeness (Fig. 1). Refer to the chart of the “Other remarks” section to know how many parts should be there. © by WilTec Wildanger Technik GmbH Item 62534 Page 3 http://www.WilTec.de...
- Page 4 Position 1 Position 2 Figure 2a Figure 2b 2. Fix the fixing rail into the notch with the help of the winged screw as shown in Fig. 3. © by WilTec Wildanger Technik GmbH Item 62534 Page 4 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 5 Then the pressing piece will move backwards and downwards together with the frame guide. When bent, the pipe can be easily removed. © by WilTec Wildanger Technik GmbH Item 62534 Page 5 http://www.WilTec.de...
- Page 6 • Regularly lubricate the frame. Important Note: Reproduction and any commercial use (of parts) of this operating manual, requires a written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 62534 Page 6 http://www.WilTec.de http://www.aoyue.eu 2021-1...
Need help?
Do you have a question about the 62534 and is the answer not in the manual?
Questions and answers