WilTec 51253 Operation Manual

Universal bender

Operation Manual

ARTICEL 51253

Universal Bender

Read and follow the operating instructions and safety information before using for the first time.

Technical changes reserved!

Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.

Updating the documentation

If you have suggestions for improvement or have found any irregularities please contact us.

Seite 4

http://www.WilTec.de

http://www.aoyue.eu

http://www.teichtip.de

Table of Contents

Need help?

Do you have a question about the 51253 and is the answer not in the manual?

Page 1 Due to further developments, illustrations, functioning steps and technical data can differ insignificantly. Updating the documentation If you have suggestions for improvement or have found any irregularities please contact us. © by WilTec Wildanger Technik GmbH Seite 4 http://www.WilTec.de http://www.aoyue.eu...
Page 2 The information contained in this document is subject to change without prior notice. No part of this document can be copied or duplicated in another form without the prior written consent of WilTec Wil- danger Technik GmbH. The WilTec Wildanger Technik GmbH assumes no liability for any errors in this user manual or the connection diagram.
Page 3 1. Limit lever 4. Bending die plate 2. Die plate (fillet radius 10/15) 5. Die plate of diamond section 3. Die plate (fillet radius 20/25) 6. Bending eccentric seat © by WilTec Wildanger Technik GmbH Seite 6 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de...