Table of Contents
Advertisement
Quick Links
Operation Manual
12 t and 16 t Pipe Bender
61490, 51840
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignific -
antly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for WilTec 61490
Summary of Contents for WilTec 61490
- Page 1 Operation Manual 12 t and 16 t Pipe Bender 61490, 51840 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignific - antly.
- Page 2 All rights reserved. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 Capacity (t) Net weight (kg) Dimensions (mm) Degree of Bend (inch) ½, ¾, 1, 1¼, 1½, 16 tons 680×610×190 Up to 90° 2, 2½, 3 © by WilTec Wildanger Technik GmbH Item 61490, 51840 Page 3 http://www.WilTec.de http://www.aoyue.eu 01 2021-1 http://www.teichtip.de...
- Page 4 № Description Quantity Bending die Handle Tensions spring plate Bolt M14×35 Spring Bottle jack 10 Roller Bolt M8×20 11 Pin 2 Washer 12 Roller pin © by WilTec Wildanger Technik GmbH Item 61490, 51840 Page 4 http://www.WilTec.de http://www.aoyue.eu 01 2021-1 http://www.teichtip.de...
- Page 5 10 Coat 24 Pin 11 Oil plug 25 Steel wire pin 12 Trapezoidal ring 26 Handle 13 Cylinder ball 27 Oil suction pipe 14 Base © by WilTec Wildanger Technik GmbH Item 61490, 51840 Page 5 http://www.WilTec.de http://www.aoyue.eu 01 2021-1 http://www.teichtip.de...
- Page 6 13 1½” module Guide wheel 14 2” module Jump ring 15 Handle bar Spring 16 Oil outlet valve Top tray 17 Oil injection hole ½” module © by WilTec Wildanger Technik GmbH Item 61490, 51840 Page 6 http://www.WilTec.de http://www.aoyue.eu 01 2021-1 http://www.teichtip.de...
- Page 7 4. When the tube has been bent to the desired angle, remove the handle from the jack. 5. Loosen the valve loosening screw one full turn (counter-clockwise). This loosens the pipe and makes it easy to remove. © by WilTec Wildanger Technik GmbH Item 61490, 51840 Page 7 http://www.WilTec.de...
- Page 8 Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part of this instructions manual require the written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 61490, 51840 Page 8 http://www.WilTec.de...
Need help?
Do you have a question about the 61490 and is the answer not in the manual?
Questions and answers