Advertisement
Quick Links
GO – Operating Supplement
BEMER GO Set COMPONENTS:
What comes with your BEMER GO Set?
•
B.Box Pro
•
B.Pad
•
B.Grip
•
B.Spot
•
B.Scan
B.PAD Local Applicator
•
B.Grip Fixing Strap
•
Car Adapter Plug
•
Wall Mount
•
Power Adapter and cable
•
Quick Start Guide
BEMER USA
The Basic Plan is carried out
using the B.PAD. The B.PAD
is handy, flexible, and mobile.
It can be applied around the
knees, legs, arms, back and
abdomen.
It also can be laid flat along the
spine or across the lower
Both the Basic Plan and all oth-
er application suggestions are
based on many years of experi-
ence. This experience has also
shown that successful therapy
results are achieved most quick-
ly through regular appication.
1/11
back.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Bemer GO
Summary of Contents for Bemer GO
- Page 1 BEMER USA GO – Operating Supplement BEMER GO Set COMPONENTS: What comes with your BEMER GO Set? • B.Box Pro • B.Grip Fixing Strap • B.Pad • Car Adapter Plug • B.Grip • Wall Mount • B.Spot • Power Adapter and cable •...
- Page 2 BEMER USA The BEMER Signal emits a PEMF from both sides of the B.PAD, making it easy apply to the desired location. B.GRIP holds the B.SPOT To hold the B.SPOT in place over a specific area, you can use the B.GRIP fixing strap as shown here.
- Page 3 BEMER USA Connections B.BOX The B.PAD, and B.SPOT connect to one of the 2 magnetic ports on the right side of the B.Box. IMPORTANT NOTE: Connect the magnetic plugs gently! A1 is the top port. A2 is the bottom port Attach from an angle: top –...
- Page 4 BEMER USA Tilting the posistion of the B.BOX • Place your thumbs on the lighter grey top and hold the darker grey bottom with the rest of your fingers. • Firmly push back back with your thumbs. • It will slide back and tilt upward. Let it tilt up on its own. Do not force it.
- Page 5 BEMER USA Running Your BEMER Turn on B.Box – it will take approx. 45 seconds to activate the computer inside. We will explore the two icons INTENSITY and PROGRAM INTENSITY PROGRAM TURN ON: Power Button Basic Plan 5/11...
- Page 6 BEMER USA Running a Session Connect B.PAD plug to [A1]/[A2] Push [A1 /A2] icon on the bottom of B.BOX screen. The port corresponding port will be hightlighed. Push Intensity level icon. Example: Push Level [Intensity 1] Push [Start] NOTE: The applicator being used will display on the right side of screen and is blinking during use.
- Page 7 BEMER USA Understanding the Plus Signal [ON]When you see this icon [OFF] When you push the “Plus button and the icon above disappears Note: When the Plus is on, every 20 seconds the energy output of the electromagnetic field (in this example Intensity Level 1) will jump to Intensity Level 10.
- Page 8 BEMER USA BEMER Program Mode 3 Preset Programs [Program 1](8 minutes): Intensity 2 for 2 minutes Intensity 3 for 2 minutes Intensity 4 for 4 minutes Note: each bar of the graph denotes a 2 minute period of the entire session.
- Page 9 BEMER USA Program 2 (16 minutes): Intensity 2 for 4 minutes Intensity 3 for 4 minutes Intensity 4 for 4 minutes Intensity 6 for 4 minutes Program 3 (20 minutes): Intensity 6 for 4 minutes Intensity 7 for 4 minutes...
- Page 10 BEMER USA Setting the intensity to HIGH / LOW as default The B.PAD can be used for program treatment and treatment by Basic Plan. For ongoing care to sup- port the musculature, the “LOW” setting is recommended for usage with the “Basic Plan •...
-
Page 11: Additional Information
BEMER USA ADDITIONAL INFORMATION: Switching between A1 & A2 ports: Push [A1] or [A2]at the bot- tom of the screen respectively. The one you push will be highlighted on the B. Box. This is the port that is now ready for operation when you attach the applicator.
Need help?
Do you have a question about the GO and is the answer not in the manual?
Questions and answers