Honda Accord Sedan 2016 Manual page 94

Indicator Name
Auto High-Beam
Indicator
(Green) *
Auto High-Beam
Indicator
(Amber) *
*1:Models with the keyless access system have an
*2:Models with multi-information display
* Not available on all models
On/Blinking
Comes on for a few seconds when
●
you turn the ignition switch to ON
( w *1 , then goes off.
Comes on when all the operating
●
conditions of the auto high-beam
are met.
Comes on if there is a problem with
●
the auto high-beam.
Comes on when the area around
●
the camera on the windscreen is
blocked by dirt, mud, etc.
ENGINE START/STOP
Explanation
2 Auto High-Beam * P. 169
Manually operate the headlight
●
switch.
If you are driving with the high beam
●
headlights when this happens, the
headlights are changed to low beams.
Stop in a safe place and clean the
●
camera lens with a soft cloth.
If the indicator does not turn off after
●
cleaning the lens, have your vehicle
checked by a dealer.
button instead of an ignition switch.
uuIndicatorsu
Message *2
—
—
Continued 93