Honda Accord Sedan 2016 Manual page 287

uuAudio System Basic OperationuWi-Fi Connection
Wi-Fi Connection
You can connect the display audio to the Internet using Wi-Fi and browse websites
or use online services on the audio/information touch screen. If your phone has
mobile hotspot capabilities, the system can be tethered to the phone. Use the
following steps to setup.
■
Wi-Fi mode (setting for the first time)
* Not available on all models
286
*
*
1. Select Settings from the home screen.
2. Select Bluetooth/Wi-Fi.
u Open the Wi-Fi tab.
3. Select Wi-Fi On/Off Status, then On.
4. Select Wi-Fi Network List.
u Make sure your phone's Wi-Fi setting is
in access point (tethering) mode.
u Select the phone you want to connect to
the system.
u If you do not find the phone you want to
connect in the list, select Scan.
5. Select Connect.
u Enter a password set for your phone, and
select OK.
u When the connection is successful, the
icon is displayed on the list.
6. Select to go back to the home screen.
1Wi-Fi mode (setting for the first time)
You cannot go through the setting procedure while a
vehicle is moving. Park in a safe place to setup the
Wi-Fi connection.
Some mobile phone carriers charge for tethering and
smartphone data use. Check your phone's data
subscription package.
Check your phone manual to find out if the phone
has Wi-Fi connectivity.
You can confirm whether Wi-Fi connection is on or
off with the icon on Wi-Fi Network List.
Transmission speed and others will not be displayed
on this screen.