Honda Accord Sedan 2016 Manual page 85

uuIndicatorsu
Indicator Name
Transmission
Indicator
Seat Belt
Reminder
Indicator
*1:Models with the keyless access system have an
*2:Models with multi-information display
*3:On the left: Australian, New Zealand, Indonesian, and African right-hand drive models On the right: Malaysian models
84
On/Blinking
Blinks if the transmission system
●
has a problem.
Comes on and the beeper sounds if
●
you are not wearing a seat belt
when you turn the ignition switch
to ON ( w *1 .
If the front passenger is not
●
wearing a seat belt, the indicator
comes on a few seconds later.
Blinks while driving if either you or
●
the front passenger has not
fastened a seat belt. The beeper
sounds and the indicator blinks at
regular intervals.
ENGINE START/STOP
Explanation
Blinks while driving - Avoid sudden
●
starts and acceleration and have your
vehicle checked by a dealer
immediately.
The beeper stops and the indicator
●
goes off when you and the front
passenger fasten their seat belts.
Stays on after you or the front
●
passenger has fastened the seat
belt - A detection error may have
occurred in the sensor. Have your
vehicle checked by a dealer.
2 Seat Belt Reminder P. 39
button instead of an ignition switch.
Message *2, 3