Honda Accord Sedan 2016 Manual page 382

■
Starting to Drive
When the engine was started using the
1. While depressing the brake pedal, press the ENGINE START/STOP button.
When the engine was started in any case
1. Keeping your right foot on the brake pedal, release the parking brake. Check that
the parking brake indicator has gone off.
2 Parking Brake P. 426
2. Put the shift lever in ( D . Select
3. Gradually release the brake pedal and gently depress the accelerator pedal to pull
away.
■
Hill start assist system
Hill start assist keeps the brake engaged briefly to help to prevent the vehicle from
rolling on inclines as you move your foot from the brake pedal to the accelerator.
Automatic transmission models with 5 positions
Move the shift lever to ( D , or
then release the brake pedal.
Automatic transmission models with 6 positions
Move the shift lever to D , d , or
( (
downhill, then release the brake pedal.
* Not available on all models
button * on the keyless remote
( R when reversing.
( S when facing uphill, or ( R when facing downhill,
L when facing uphill, or
(
1Starting to Drive
When the engine was started using the
the keyless remote
The engine stops when the shift lever is moved out of
P (
pressed. Follow the step 1 when starting to drive.
1Hill start assist system
Hill start assist may not prevent the vehicle from
rolling downhill on a very steep or slippery slope, and
does not operate on small inclines.
Hill start assist is not a replacement for the parking
brake.
R when facing
(
uuWhen DrivinguStarting the Engine
before the ENGINE START/STOP button is
button * on
381