Setting Up, General Information, Auto And List Modes - Toshiba 28ZH46 Series Owner's Manual

Table of Contents

Advertisement

general information, Auto and List modes
This television has a multi-page teletext memory, which takes a few moments to load. It offers two Modes of
viewing text – Auto will display Fastext, if available. List will store your four favourite pages.
Selecting Modes
The teletext character set will be automatically chosen by
the language setting in the Set up menu.
Select Teletext Mode from the Set up menu.
1
2
With S or R choose Auto or List then press EXIT.
Set up
Language
Country
Auto Tuning
Manual Tuning
Programme Sorting
Teletext Mode
EXIT To Exit
fe
Teletext information
/
6
7
:
The
button
To view teletext press
/
6
7
the teletext over a normal broadcast picture and again to
return to normal viewing. Programmes cannot be
changed until teletext is cancelled.
The first text page shown will be the initial page.
In Auto mode this displays the main subjects available
and their relevant page numbers.
In List mode this displays whichever page number is
currently stored on the RED button.
In either mode any teletext page can be accessed by
entering the 3 digit page number using the numbered
buttons, pressing the coloured buttons or pressing
P
( P ) to advance to the next page and P
f
go back to the previous page.
Teletext – setting up,
z
English
x
z
GB
x
x
x
x
z
List
x
Select
z x
Adjust
. Press again to superimpose
( Q ) to
e
Navigating pages using Auto
If Fastext is available four coloured titles will appear at
the base of the screen.
To access one of the four given subjects, press the
relevant coloured button on the remote control.
For further information on your particular text system(s),
see the broadcast teletext index page or, consult your
local Toshiba dealer.
Navigating pages using List
The four coloured choices at the bottom of the screen are
numbers – 100, 200, 300 and 400, which have been
programmed into the television's memory. To view these
pages press the relevant coloured buttons.
To change these stored pages press the relevant coloured
button and enter the 3 digit number. This number will
change in the top left of the screen and in the coloured
highlight.
Press OK to store. The bars at the bottom of the screen
will flash white. Whenever OK is pressed all four
page numbers showing at the bottom will be stored
and the previous ones will be lost.
If OK is not pressed the selection will be forgotten when
teletext is cancelled.
Other pages may be viewed by entering the 3 digit page
number – but DO NOT press OK or these pages will be
stored.
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

32zh46 series32zh47 series28zh47 series

Table of Contents