Eliminate Malfunction - Bosch Rexroth MS2S Operating Manual

Synchronous servomotors

Hide thumbs

Table Of Contents

Table of Contents

42 / 50

Magnets

WARNING

Danger due to permanent magnets!

−

Health hazard for persons with heart pace-

makers, metallic implants and hearing aids

in direct environment of permanent mag-

nets.

−

Crushing hazard of fingers and hand due to

heavy attractive forces of the magnets.

−

Risk of destruction of sensitive parts like

watches, credit cards, ...

Remark: The permanent magnets of the rotor

or secondary part must be demagnetized before

disposal to avoid injuries or damage.

The demagnetization is reached via special

thermal treatment. The handling duration is influ-

enced by the rotor frame size. The rotor or the

secondary part has to remain in the oven for a

minimum of 30 minutes, starting at the time, the

magnetic surface has reached 300 °C. If the mag-

nets are surrounded by a bandage or a cover

plate, it is recommended to remove it before

heating in the oven to expose the magnets.

If demagnetization is successful, the magnets can

be separated from the rotor or secondary part

after cooling without applying force.

Packaging

Our packaging materials do not contain any prob-

lematic materials and can therefor be easily dis-

posed. Packaging materials are: wood, cardboard

and polystyrene.

As a matter of principle, the instructions in the project planning and commissioning manuals must be

followed in case of failures and errors. Contact the manufacturer, if necessary.

Fault description

Motor does not run

Bosch Rexroth AG

Batteries and accumulators

The symbol indicating "separate collection" for all

batteries and accumulators is the crossed-out

wheeled bin. End users in the EU are legally

bound to return used batteries and accumulators.

Outside the scope of the EU Directive

2006/66/EC, the applicable regulations must be

followed. Batteries and accumulators can contain

hazardous substances which can harm the envi-

ronment or people's health when improperly

stored or disposed of. The batteries or accumula-

tors must be returned to the country-specific col-

lection systems for proper disposal.

Disposal by the manufacturer

Our products can be returned to us for disposal.

However, this requires that the products are free

from oil, grease or other dirt. The motor compo-

nents must be returned in a suitable packaging

(origin package if possible). In the case of a

transport by air freight, please observe the dan-

gerous goods regulations (IATA) for the secon-

dary part.

Send the products to the following address, car-

riage free:

Bosch Rexroth AG

Bgm.-Dr.-Nebel-Str. 2

97816 Lohr a.Main, Germany

Cause

Controller enable signal missing

Controller fault

Voltage supply missing