Commissioning And Operation; Safety - Bosch Rexroth MS2S Operating Manual

36 / 50

Safety

3. Turn the nut clockwise (arrow direction
"close")
Tightening torque hand-tight or 1.5 Nm. At
a minimum, the lock must be turned by
approx. 20° (at least 3 clicks), or until the
marking a is in the area b.
�� Should this position be reached, the
connector is safely locked.
4. Secure the cables, that accruing forces
due to cable vibrations onto the connector
are prevented.
Disconnect SpeedTec connector
1. Turn the nut counterclockwise (arrow
direction "open")
Bosch Rexroth AG
2. Straight and evenly disconnect the con-
nector from the mounting box.
�� The plug is disconnected.
8 Commissioning and
operation
8.1 Safety
WARNING
High electric voltage! Danger to life, risk of injury
by electric shock.
−
Life parts are dangerous.
Do not open any covers or flange sockets
during operation.
Never connect or disconnect plug connec-
tors under load!
WARNING
Risk of injury due to rotating motor shaft!
−
Do not remove any covers, machine parts or
protection devices during operation.
Do not enter the range of movement of the
machine. Avoid unintended access for per-
sons, due to
−
Safety fences, safety screens or pro-
tective covers.
−
Optical sensors
MS2S
R911410077, Edition 01