Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Taipeng Manuals
  4. Outdoor Furnishing
  5. 2127119
  6. Assembly manual

Taipeng 2127119 Assembly Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
12 ft x 14 ft / 3.66 m x 4.27 m
HEPPNER HARDTOP GAZEBO
ITM. / ART. 2127119
IMPORTANT. PLEASE READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE
If you experience any product malfunction, defect or are missing any parts,
please contact our customer service department at 1-855-586-8118 or
servicec @ taipengchina.com. Our hours of operation are Monday - Friday,
8:30 AM to 5:30PM EST.
-1-

Advertisement

loading

Related Manuals for Taipeng 2127119

Summary of Contents for Taipeng 2127119

  • Page 1 12 ft x 14 ft / 3.66 m x 4.27 m HEPPNER HARDTOP GAZEBO ITM. / ART. 2127119 IMPORTANT. PLEASE READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE If you experience any product malfunction, defect or are missing any parts, please contact our customer service department at 1-855-586-8118 or servicec @ taipengchina.com.

  • Page 2: Safety Information

    SAFETY INFORMATION For the best assembly and usage experience, please read through all steps before attempting to assemble, operate or install the product • WARNING: It is the consumer’s responsibility to comply with any building codes, ordinances, zoning limitations, or local homeowner’s restrictions and obtain any required permit, before purchase and installation of the products.
  • Page 3 Components Post Base Cover Top Cover Left-Short Lintel Right-Short Lintel Left-Long Lintel Right-Long Lintel Connector Left-Support Bar Right-Support Bar Corner Piece Cover Lintel Cover Connector Long-Top Bar...
  • Page 4 Long-Top Connecting Tube Short-Top Bar Small Short-Top Bar Small Short-Top Bar Base Plate Base Cover Top Frame Top Connecting Tube Small-Top Bar Small-Top Center Device Hook Small-top Frame Small-top Frame Small-Top Connecting Tube...
  • Page 5 Connecting Tube Corner cover Supporting Tube(Left) Supporting Tube(Right) Supporting Tube(Left) Supporting Tube(Right) Middle Supporting Tube Middle Supporting Tube Middle Supporting Tube Middle Supporting Tube Long Edge Sealing of Big-Top(Middle) Short Edge Sealing of Big-Top(Left) Short Edge Sealing of Big-Top(Right) Long Edge Sealing of Big-Top(Left) Long Edge Sealing of Big-Top(Right)
  • Page 6 Long Edge Sealing of Small-Top Short Edge Sealing of Small-Top Big Top Cover Wind Vane Small-Top Ridge Big-Top Ridge Big-Top Ridge Connector Long Angle Bar Short Angle Bar Left Triangle Plate of Big-Top Left Plate of Big-Top Middle Plate of Big-Top Bar Right Plate of Big-Top...
  • Page 7 Right Triangle Plate of Big-Top Middle Plate of Big-Top Plate of Small-Top Plate of Small-Top Plate of Small-Top Hardware Bolt\Flat Bolt\Flat Washer\ Nut Washer (m6*15) (m6*35) Bolt\Flat Bolt\Plastic Washer\ Nut Washer (m6*40) (m6*45) Bolt\Flat Wrench Washer (m6*10) Bolt (m6*15) Expansion bolt Bolt\Flat Washer\ Nut Cross Wrench...
  • Page 8 Step 1 Fig 3 Fig 1 Fig 2 Fig 3 Fig 2 Fig 1 1.1. Insert the Base Cover (I) into the bottom post，connect the Base Plate (H) to the Post (A) with Bolt (AA), as seen in Fig 1; 1.2.
  • Page 9 Step 2 Fig 4.1-Fig 4.4 Fig 4.1 Fig 4.2 Fig 4.3 Fig 4.4 Fig 5.1-Fig 5.4 Fig 5.1 Fig 5.2 Fig 5.3 Fig 5.4 2.1. Connect the Right Long Lintel (C4) and the Left Long Lintel (C3) with the Connector (D) and Bolt（AA)， with Bolt (CC) at the top of the lintel, fix the Lintel Cover (F2) at the same time, as seen in Fig 4.1-Fig 4.4;...
  • Page 10 Step 3 Fig 7 C3/C4 Fig 6 Fig 8 3.1. Connect the Left and Right Long Lintels (C3 / C4) to the Top Cover (B) with Bolt (AA), as seen in Fig 6； 3.2. Connect Left-Support Bar (E1) to the Left-Long Lintel (C3)and the Post (A) with Bolt (AA), as seen in Fig 7； 3.3.
  • Page 11 Step 4 Fig 9.1 Fig 10.1 Fig 9.2 Fig 10.2 Fig 9.1 Fig 9.2 Fig 10.1 Fig 10.2 4.1. Connect the Lintels (C1/C2) to the Top Cover（B）with Bolt (AA), as seen in Fig 9.1-Fig 9.2； 4.2. Connect the Left-Support Bar (E1) to the Left-Short Lintel (C1) and the Post (A) with Bolt (AA), as seen in Fig 10.1；...
  • Page 12 Step 5 Fig 11.1-Fig 11.2 Fig 12 C2/C4 C1/C3 C2/C4 C1/C3 Fig 11.1 C1/C3 C2/C4 Fig 11.2 Fig 12 5.1. Connect the Corner Piece (F) to the Post (A) with Bolt (OO), as seen in Fig 11.1； 5.2. Connect the Cover (F1) to the Top Cover (B) with Bolt (AA), as seen in Fig 11.2; 5.3.
  • Page 13 Step 6 Fig 13 6. Insert the Top Connecting Tube (K) into the Top Frame (J) with Bolt (AA), as seen in Fig 13. AAx4 -13-...
  • Page 14 Step 7 Fig 14 ±5mm C2/C4 C1/C3 Fig 15 Fig 16 7.1.Connect the Long-Top Bar (G) to the Long-Top Connecting Tube (G1), as seen in Fig 14. 7.2. Connect the Long-Top Bar (G) with the Long-Top Connecting Tube (G1), by the Corner Piece (F) with Bolt (BB), conenct the other end of the Long-Top Bar (G) to the Top Frame (J) with Bolt (AA)，...
  • Page 15 Step 8 C1/C2/C3/C4 Fig 17 Fig 18 8.Connect the Short-Top Bar（G2）to the Top Frame（J）with Bolt (AA)，then connect the other end to the lintels（C1/C2/C3/C4）with Bolt（AA)，as seen in Fig 17-Fig 18. G2x10 AAx20 -15-...
  • Page 16 Step 9 G3/G4 Fig19.1 C1/C2/C3/C4 Fig19.2 Fig 20 9.Connect the Connector (F3) to one end of the Small Top Bar (G3/G4) with Bolts (AA) and then to the Long-Top Bar (G) with Bolts (AA); connect the other end to the Lintels (C1/C2/C3/C4) with Bolts (AA), as seen in Fig 19.1-Fig 20.
  • Page 17 Step 10 This hole faces outward Fig21 Fig22.2 Fig22.1 Fig23 10.1. Connect the Small-top Frame (M1) and the Small-top Frame (M2) through the Small-Top Connecting Tube (N1) with Bolt (HH), as seen in Fig 21. Pls note that the hole of the screw nut faces outward. 10.2.
  • Page 18 Step 11 Fig24 Fig25.1 Fig25.2 11.1 Put the assembled Small-Top into the Top Frame (J/K) with Bolt (AA), as seen in Fig 24. 11.2 Connect the other end to the Connecting Tube (N2) to the Small-Top Center Device (L2) with Bolt (EE), and Connect one end of the Top Frame (K) with Bolt (AA), as seen in Fig 25.1-Fig 25.2.
  • Page 19 Step 12 Fig26.1 Fig26.2 12. Connect the Small-Top Supporting Tube (S1/S2) to the Small-Top Bar (L1) with bolt (AA),Connect the middle of the Small-Top Supporting Tube (S1) to the Connecting Tube (N2) with bolt (AA) , as seen in Fig 26.1-Fig 26.2. S1x2 S2x2 AAx10...
  • Page 20 Step 13 the connect shape of steel top panel Fig27 13. Assemble the Plate of Small-Top (Z1/Z2) one by one and fix them onto the Small-Top Supporting Tube (S1) with Bolt (GG). Then install the Plate of Small-Top (Z) and fix them onto the Small-Top Supporting Tub (S2) with Bolt (GG), as seen in Fig 27.
  • Page 21 Step 14 Fig 28 Fig 29 Fig 30 14.1 Install the Small-Top Ridge (W1) onto the Small-Top with Bolt (FF), then cover the Big-Top Cover (U) with Bolt (II), as seen in Fig 28. 14.2 Install the Long Edge Sealing of Small-Top (T1) on the long side of the Small-Top with Bolt (AA). Install the Short Edge Sealing of Small-Top (T2) on the short side of the Small-Top with Bolt (AA), as seen in Fig 29.
  • Page 22 Step 15 G2/G3 P1/P3 Q1/Q2/Q3/Q4 G2/G4 Fig31 P2/P4 15. Tighten all the supporting tubes with Bolt (AA) one by one based on the sequence shown in the figure, as seen in Fig 31. P1x4 P3x4 Q1x4 Q3x2 P2x4 P4x4 Q2x4 Q4x10 AAx128 -22-...
  • Page 23 Step 16 R/R1/R2/ R3/R4 G2/G3/G4 Fig 32 16.Connect the Edge Bands（R/R1/R2/R3/R4) to the small short bars（G2/G3/G4) by Bolt（DD), as seen in Fig 32 R1x2 R2x2 R3x2 R4x2 DDx18 -23-...
  • Page 24 Step 17 Y1/Y2/Y4/Y5/Y6 R/R3/R4 the connect shape of steel top panel Fig33 P3/P4/Q2/Q4 -24-...
  • Page 25 the connect shape of steel top panel Y1/Y2/Y3/Y4/Y5/Y6 P3/P4/Q4 Fig 34 R1/R2 17.1. As is shown in the graph，install the Top Boards（Y1/Y2/Y6/Y4/Y5) in sequence, and have them fixed onto the Supporting Tubes（P3/P4/Q2/Q4) one by one by Bolt (GG), as seen in Fig 33. Tips：Pls do not tighten all the screws until all the top boards are installed.
  • Page 26 Step 18 Fig36 Fig35 18.1 Cover the Big Top Cover (W2/W3) over the big top frame and tighten them by Bolt (II), as seen in Fig 35. 18.2 Fix the L Plates (X1/X2) on the Top Connecting Tube (J/J1) with Bolts (AA), connect the other side in the same way, as seen in Fig 36.
  • Page 27 Step 19 Fig37 19.Using an electric concrete drill,drill holes into the concrete floor, corresponding to the holes in Base Plates(H). Insert Expansion bolt (KK) into the holes and hammer into place, using a hammer. Fasten Expansion bolts (KK), make sure the base plates (H) are totally grounded, as seen in Fig 37. KKx16 -27-...

  • Page 28: Care And Maintenance

    CARE AND MAINTENANCE • For cleaning, use a mild detergent solution, rinse with water, and allow to air dry. Do not use acetone, abrasive, or other special detergents as they would be harmful to the product’s finish. • Due to the nature of steel, surface oxidation (rusting) will occur if this protective coating is scratched.