PACKAGE CONTENTS - RAFTERS BEAMS AND CANOPY PART DESCRIPTION QUANTITY PART DESCRIPTION QUANTITY Lintel Center connector Angle head Fabric Top support bar...
PREASSEMBL Y INSTRUCTIONS - RAFTERS 1.Put the lintel (B) together, insert one lintel (B) into angle head (C), take another lintel (B) and insert it into the other end of the lintel. Connect the rest of lintel (B) with angle head (C) in the same way...
PREASSEMBLY INSTRUCTIONS- POSTS 2.Connect the little ball (H) to the top of the post (A) directly. 3.Fasten the ring screw (J) onto the post (A) directly . Hardware Used Ring Screw...
ASSEMBLY INSTRUCTIONS 4.Insert the connected lintel into the post (A), and fix it with the handle screw (I). Hardware Used Handle Screw...
Page 9
ASSEMBLY INSTRUCTIONS 5.Insert the end of one top support bar (D) into central connector (E), insert the other end into angle head (C), in the same way, insert the another three top support bars (D) into three more angle heads (C).
Page 10
ASSEMBLY INSTRUCTIONS 6.Put the fabric (G) on the top of gazebo and fix it on the lintel (B) with the elastic button (H) through top covered fold, then with one end of the coupling hook (K) through the corner of the fabric (G), connect the other end to the ring screw.
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING Assemble the item on a soft, non-abrasive surface, such as carpeting, to avoid • damage. This item is heavy. Use care when handling. •...