Display Indications - Vitek VT-3585 SR Manual Instruction

RECEIVER DIAGRAM
SPECIAL FUNCTIONS
1. MW/SW Band selector
2. Electronic lock button
3. Power indicator
4. Settings regulator
5. Radio settings indicator
6. Headphones jack
7. Sleep timer button
8. Setting the hour\increasing the
volume
9. Setting the minute/lowering the
volume
10. Receiver On/Off button
11. Display
12. Backlight button
13. Current time/alarm setting button
15. Telescopic antenna
16. 220 V AC power connection using
the provided cable
17. Carrying handle
18. Battery compartment

DISPLAY INDICATIONS

1. Sleep timer indicator
2. Electronic lock indicator
3. Reception indicator
4. FM indicator
5. AM indicator
6. Station frequency indicator
7. MW band indicator
8. FM/SW band indicator
9. Volume level indicator
10. Volume adjustment indicator
11. Volume meaning indicator
12. World time indicator
13. Current time indicator
14. Alarm indicator
15. Current time mode indicator
3585IM_new.indd 3 3585IM_new.indd 3
POWER
Installing the batteries
1. This radio receiver can use three
UM1 type batteries for power.
They must be inserted into the
battery compartment, following
polarity.
2. If the sound weakens or static
is heard when listening, new
batteries should be installed.
Attention!
1. Do not use new and old batteries
or batteries of different types at
the same time.
2. To avoid spillage of electrolyte
and threat of dangerous
explosion, it is not recommended
to recharge, heat, or take
batteries apart.
3. If you are not planning to use
the receiver for a long period
of time, don't forget to remove
the batteries, otherwise the
electrolyte may spill and damage
parts of the device.
AC power
1. Plug in the power cord to the AC
power outlet.
2. If the device is connected to
power, the batteries automatically
turn off.
PREPARING THE RECEIVER FOR
OPERATION
Checking the activation of the
electronic lock before turning the
receiver on
1. If after installing the batteries, the
symbol appears on the
3
English
11.03.2009 17:04:0 11.03.2009 17:04:0