Chore-Time Tronics 3 Manual page 16

Control Setup
Female Water Clock
In the Setup/Outputs/Clock/Female Water Screen...
1.Select the Relay or Relays from the drop-downs.
2.Rename if needed.
1
Male Water Clock
Set up for the Male Water Clock is the same as for the Female Water Clock.
Feeder Fill Clock
In the Setup/Outputs/Clock/Feeder Fill Screen enter....
1.The Relay or Relays from the dropdown.
2.Select the Scale type from the dropdown
3.Select the scale number from the dropdown
4.Rename if needed.
Note: Follow the same steps to setup all Feeder Fill Clocks. Caution! Do not allow Weigh Fill and Feeder
Fill Times to Overlap.
1
2
16
Chore-Tronics® 3 Breeder Edition Control
2
4
3
MT2484A