Safety Measures - Vitek VT-8601 W Manual Instruction

ENGLISH
ICE CREAM MAKER VT-8601 W
The home ice cream maker is intended
for making of ice cream, sorbet, frozen
yogurt and fruit ice.
DESCRIPTION
1. Ice cream making bowl
2. Rotating spatula
3. Lid
4. «O/I» power switch.
5. Motor unit
6. Power cord
7. Opening for adding ingredients
8. Motor unit and bowl matching marks
ATTENTION!
For additional protection you can install
a residual current device with nominal
operation current not exceeding 30 mA
into the mains; contact a specialist for
installation.

SAFETY MEASURES

Read this instruction manual carefully
before using the unit and keep it for the
whole unit operation period.
Use the unit for its intended purpose only,
as specified in this manual.
Mishandling of the unit may lead to its
breakage and cause harm to the user or
damage to his/her property.
To avoid the risk of fire, electric shock and
to prevent injury, observe the following
safety measures.
•
Before connecting the unit to the
mains, make sure that the voltage
specified on the unit corresponds to
your home mains voltage.
•
Place the ice cream maker on a flat
stable surface; do not place the unit on
the edge of the table.
T-8601.indd 4
•
Do not let the power cord hang from
the edge of the table and make sure it
does not touch hot surfaces or sharp
edges of furniture.
•
Do not use the ice cream maker near
heat sources or open flame.
•
Do not use the ice cream maker out-
doors.
•
Do not touch the motor unit, the power
cord and power plug with wet hands.
•
Switch the unit on only after installing
the motor unit with the lid on the ice
cream making bowl.
•
Before switching the ice cream maker
on make sure that there are ingredients
in the bowl.
•
Do not leave the operating ice cream
maker unattended.
•
Do not use off-brand spare parts and
do not make any alterations to the unit
design.
•
Do not touch the rotating spatula, do
not immerse any foreign objects into
the bowl during the ice cream maker
operation.
•
Remove the motor unit with the lid
only after complete stop of the rotat-
ing spatula.
•
Unplug the unit before cleaning
or when you are not using it. When
unplugging the unit, pull the plug but
not cord.
•
To avoid electric shock do not immerse
the motor unit, the power cord or the
plug into water or other liquids.
•
For children safety reasons do not
leave polyethylene bags, used as
packaging, unattended.
Attention! Do not allow children to play
with polyethylene bags or packaging film.
Danger of suffocation!
4
25.01.2017 11:48:04