Wiring Diagram - Dual XD6150 Installation & Owner's Manual

Am/fm/cd receiver with 3.5mm auxiliary input, usb charging port and detachable face
Hide thumbs Also See for XD6150:
Table of Contents

Advertisement

Rear Preamp Output
Connect to amplifier RCA input
Antenna Connector
BLUE
Remote Turn-On
Connect to amplifier or power
antenna. Insulate wire if not used.
BLACK
Ground
Connect to vehicle
chassis ground.
RED
Accessory
Connect to ignition
circuit or switched 12 volt source.
10 AMP
AGC Fuse
YELLOW
Memory
Connect to battery
circuit or constant 12 volt source.
Right Front
Right Rear
Gray/Black (-)
Violet/Black (-)
Gray (+)
Violet (+)
Left Front
Left Rear
White/Black (-)
Green/Black (-)
White (+)
Green (+)
All manuals and user guides at all-guides.com
XD6150 INSTALLATION 
Wiring Diagram
LINE OUT
L-CH
R-CH
RCA Cable
(sold separately)
AMP
FUSE
When replacing the fuse,
make sure new fuse is the
correct type and amperage.
Using an incorrect fuse
could damage the radio.
The XD6150 uses one
10 amp AGC fuse located
in-line.
3

Advertisement

Table of Contents
loading

Table of Contents