English - Happy Plugs Air 1 ZEN User Manual

ENGLISH

CONNECT AND USE
Charge your Air 1 ZEN for a least 3 minutes before use.
1
Open the charge case and keep the earbuds in place to
2
enter pairing mode.
Select "Air 1 ZEN" on your phone/device to pair. Your
3
earbuds are now ready to use.
PAIR TO ADDITIONAL DEVICES
With the lid of the charge case open, press the button
1
on the bottom of the charge case for 5 seconds until the
LEDs light up in a rolling motion.
Select "Air 1 ZEN" on your phone/device to pair. Your
2
earbuds are now ready to use.
!
When you remove your earbuds from the charge case
they will automatically connect to the last device you
were connected to.
RESET TO FACTORY SETTINGS
Delete "Air 1 ZEN" from your Bluetooth devices list.
1
Make sure the charge case is charged. Put the earbuds
2
in the charge case.
With the lid of the charge case open, press and hold the
3
button on the bottom of the charge case for 10 seconds
until all 4 LEDs flash 5 times.
The earbuds are now reset and ready to pair to your device.
Just follow the "Connect and use" steps.
CALLS
When using the Air 1 ZEN for phone calls, both earbuds
are active.
If you wish to use only one earbud during a phone
!
call, please put the other earbud into the charge case
and close the lid.
BUTTON CONTROLS
× 1 Play / Pause
× 2
Next Track
× 3
Previous Track
× 1
Call Answer / Call End
R
× 2
Reject Call
× 3
Accept Call and Hold First Call
2 s
Siri / Google Assistant
× 1
Volume Up
× 2
Volume Down
L
2 s
Siri / Google Assistant
CHARGE CASE BUTTON
5 s
Earphone Pairing Mode
10 s
Reset Earphones
Full instructions & FAQ available at:
help.happyplugs.com
1