English - Happy Plugs HOPE 1700 User Manual

ENGLISH

CONNECT AND USE
Charge your HOPE for a least 3 minutes before use.
1
Open the charge case and keep the earbuds in place to
2
enter pairing mode.
Select "Happy Plugs - Hope" on your phone/device to
3
pair. Your earbuds are now ready to use.
PAIR TO ADDITIONAL DEVICES
With the lid of the charge case open, press the button
1
on the bottom of the charge case for 5 seconds until the
LEDs light up in a rolling motion.
Select "Happy Plugs - Hope" on your phone/device to
2
pair. Your earbuds are now ready to use.
When you remove your earbuds from the charge case
!
they will automatically connect to the last device you
were connected to.
RESET TO FACTORY SETTINGS
Delete "Happy Plugs - Hope" from your Bluetooth
1
devices list.
Make sure the charge case is charged. Put the earbuds
2
in the charge case.
With the lid of the charge case open, press and hold the
3
button on the bottom of the charge case for 10 seconds
until all 4 LEDs flash 5 times.
The earbuds are now reset and ready to pair to your device.
Just follow the "Connect and use" steps.
CALLS
When using the HOPE for phone calls, both earbuds are
active.
If you wish to use only one earbud during a phone
!
call, please put the other earbud into the charge case
and close the lid.
BUTTON CONTROLS
× 1
Play / Pause
× 2 Next Track
× 3 Previous Track
× 1 Call Answer / Call End
R
× 2
Reject Call
× 3 Accept Call and Hold First Call
2 s Siri / Google Assistant
× 1 Volume Up
× 2 Volume Down
L
2 s Siri / Google Assistant
CHARGE CASE BUTTON
5 s Earphone Pairing Mode
10 s Reset Earphones
Full instructions & FAQ available at:
help.happyplugs.com
1