Advertisement
IE 10 & IE 11 version:
Click 'Install' button located at the bottom of I.E. to install ActiveX plug-in. You need to do the
process as below:
Click "Internet options" section, then choice " Security " tab >> " Trusted sites " and change the
bar to "Low". Click " Sites " to add the trusted site for this IP camera. Please refer to the diagram.
Install NVR software
You can use your new Network IP Camera by its web user interface on a PC. There is a NVR
software CD comes with IP camera which allow you run 32/64 channels IP cameras and refer the
detail Web GUI operation manual of IP camera.
Setting IP camera
Click "Start " >> " All Programs"
>> "Witness NVR32/64 Pro", then
select the " Video Parameters
setup-ezSetup" accessory program to
setup the parameters.
For its installation details, please
refer to its related documents.
7
Advertisement
