Table of Contents
Advertisement
Installation
Before installation, make sure that you have the needed dependencies installed (qt3, wvdial1.5.6 or
newer), and you are in root privilege.
Notes:
If you can find the file "/etc/wvdial.conf" and "/usr/lib/qt3", then you have installed wvdial and
qt3.
The steps of installation are as following:
1. The system will automatically display a Dialog Manager CD-ROM icon on the desktop, when
you connect the modem to your computer correctly. The installation package is a
PCL_DLGLKAICE.tar.gz in the Linux of the Dialog Manager.
2. Copy the installation packet " PCL_DLGLKAICE.tar.gz" to Desktop or other path.
3. Extract and get a folder, the folder include following files or folders:
Dialog_Manager.tar.gz
install.sh
4. Double click the installation software install.sh, and click the Run in Terminal button to install.
5. When "press any key to continue..."shows up on the Terminal, press any key to finish the
software installation.
This is a installation packet.
This is a setup script.
Advertisement
Table of Contents
