Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Zte Optus MF971RS
Summary of Contents for Zte Optus MF971RS
- Page 1 Optus Portable Modem Getting started with your device...
- Page 2 1. Prepare • Your Optus micro-SIM card. • View the label on your device to get the default information. The following figure is for your reference only.
- Page 3 2. Insert your Optus Micro-SIM Card 1. Open the micro-SIM slot cover. 2. Insert your micro-SIM card. 3. Close the micro-SIM card slot cover.
-
Page 4: Access The Internet
3. Power on Your Device Press and hold the power key for about 3 seconds to power on the device. After a moment the device will connect to the Internet automatically. NOTE: If the battery is extremely low, you may be unable to power on the device, please charge your device first. 4. Access the Internet • WiFi: Get the default SSID and password on the label and connect to the WiFi network with your mobile device, and then access the Internet. - Page 5 • micro-USB cable: Connect with the computer via USB port and then access the Internet. NOTE: If the operating system does not automatically launch installation, you can double-click the device installation icon to install the software.
- Page 6 5. Change Your Device Settings You can change the device settings by logging in to the Optus WiFi Hotspot configuration web page. 1. V iew the label on your device to get the default Device Manager Website IP address and Website Password. 2. L aunch the Internet browser and enter the Device Manager Website IP address in the address bar. 3. I nput the Password and then click Login. 4. A fter the Optus WiFi Hotspot configuration web page is opened, you can change the WiFi SSID, password or other settings.
- Page 7 Use the FUNC key • When the screen is off: Press the FUNC key to turn on the screen. • When the screen is on: Press the FUNC key to access the options menu. You can connect or disconnect with the Internet, view device information or WiFi QR code, activate WPS function, enable/disable global roaming or quick boot function without logging in to the Optus WiFi Hotspot configuration page.
- Page 8 Indicator Icons and Interfaces...
- Page 9 1. Power key Press and hold for about 3 seconds to power on/off your device 2. FUNC key Operate your device 3. Screen Icon Description Network signal strength Roaming status Connected to the Internet New message(s) WiFi status and the number of connected users Battery level...
- Page 10 Charging/ Charge the device or connect to the micro-USB jack USB port of a computer micro-SIM card • Insert your micro-SIM card slot cover and • Reset hole: Press and hold for 3 reset hole seconds to restore your device to the factory settings...
-
Page 11: Troubleshooting
Troubleshooting Problem Recommended Action The connection • Install the software manually. between your Please run the installation device and a PC program. through a micro- • If the driver of your device USB cable cannot is abnormal, reinstall the be established software. You need to uninstall automatically. the software first. The connection • Ensure that the WiFi function between your device is enabled. and a client through • Refresh the network list WiFi cannot be and select the correct SSID. established. • Enter the correct network key (WiFi password) when you connect the client to your device. - Page 12 Troubleshooting Problem Recommended Action The client connected • Ensure that your micro-SIM to the device, but card is available. cannot access the • Change the location and find Internet. a place with a good signal. • Check the settings of the WAN connection mode. • Contact your service provider and confirm your APN settings. The Optus • Enter the correct address. WiFi Hotspot Please view the label on your configuration page device to get the default Device Manager Website IP address. cannot be visited. • Use only one network adapter in your PC. • Do not use any proxy server.
-
Page 13: Getting More Help
Getting More Help You can get help by: • Phone 133 937 • Visiting optus.com.au... -
Page 14: Legal Information
Legal Information Copyright © 2021 Optus Pty Ltd. All rights reserved. No part of this publication may be quoted, reproduced, translated or used in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of Optus. Notice Optus reserves the right to make modifications on print errors or update specifications in this guide without prior notice. Disclaimer Optus expressly disclaims any liability for faults and damage caused by unauthorised modifications of the software. Images and screenshots used in this guide may differ from the actual product. Content in this guide may differ from the actual product or software. Trademarks OPTUS and the OPTUS logos are trademarks of OPTUS. Other trademarks and trade names are those of their respective owners. Version No.: R1.0... -
Page 15: Warning And Notice
Warning and Notice To the User • If inadequately shielded, some electronic devices, for example, the electronic system of vehicles, may be affected by the electromagnetic interference caused by the device. Consult the manufacturers of such devices before using the device if necessary. • Operating the device may interfere with medical instruments such as hearing aids and pacemakers. Always keep the device more than 20 centimetres away from such medical instruments when your device is powered on. Power off the device if necessary. Consult a physician or the manufacturers of medical instruments before using the device if necessary. • Be aware of the usage limitation when using the device at places such as oil warehouses or chemical factories, where there are explosive gases or explosive products being processed. Power off the device if necessary. • Do not use electronic transmission devices in aircraft, at petrol stations or in hospitals. Observe and obey all warning signs, and power off the device in these conditions. • Do not touch the inner antenna area unless necessary. Otherwise the performance of the device may be affected. - Page 16 • Do not use the device in an enclosed environment or where heat dissipation is poor. Prolonged work in such space may cause excessive heat and raise ambient temperature, which may lead to automatic shutdown of the device for your safety. In the case of such an event, cool the device in a well ventilated place before turning on for normal use. • Keep the device out of the reach of small children. The device may cause an injury if used as a toy. • When the device is operating, do not touch the metallic parts. Doing so may cause burns. • Use original accessories or accessories that are authorised. Using any unauthorised accessories may affect the performance of the device and violate the related national regulations about telecom terminals. • Avoid using the device near or inside metallic constructions or establishments that can emit electromagnetic waves, because signal reception may be affected. • The device is not waterproof. Keep the device dry and store it in a shady and cool place. • Do not use the device immediately after a sudden temperature change, because dew may be generated inside and outside the device. Do not use it until it becomes dry.
- Page 17 • Handle the device carefully. Do not drop, bend or strike it. Otherwise the device may be damaged. • Only qualified personnel can dismantle and repair the device. • The humidity between 5% and 95% is recommended. • Do not connect the charger while using the device for a long period. Doing so will trigger the protection mechanism of the battery, and the battery will not be charged. If you want to charge the battery, please reconnect the charger. • Do not connect the charger while using the device for a long period or use the device and battery in non- operating temperature. Doing so will shorten battery life or cause battery swelling or leakage. If the battery shows signs of swelling or leakage, please stop use immediately. • For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.
-
Page 18: Battery Safety
Battery Safety WARNING! The battery is not removable. Removal may cause fire or explosion. • Using OPTUS-unapproved or incompatible battery, charger or power adapter may damage your device, shorten its lifespan or cause a fire, explosion or other hazards. • The recommended operating temperatures are 0°C to 35°C and the storage temperatures are – 20°C to +45°C. Extreme temperatures can damage the device and reduce the charging capacity and lifespan of your device and battery. • Do not change or replace the built-in rechargeable battery in your device by yourself. The battery can only be changed or replaced by OPTUS or an OPTUS authorised service provider. • Do not place the device or the battery in or near heating equipment, such as microwave ovens, stoves or radiators. Keep the device and the battery away from excessive heat and direct sunlight. If not, the device or the battery may overheat and cause explosion or fire. • Do not disassemble, squeeze or puncture the device, as this can cause explosion or fire. - Page 19 • Please disconnect the charger when the battery is fully charged. Overcharging may shorten the battery life. • When not using the device for a long period, please charge the battery about half and then store the device in a cool dry place. • If the battery is damaged or shows signs of swelling or leakage, please stop use immediately and contact OPTUS or an OPTUS authorised service provider for replacement.
- Page 20 YESRET5118 (10/21)