Charging The Battery; Figure 4: Desktop Charger - Motorola MXP600 Feature User Manual

4.5

Charging the Battery

You can charge a battery separately or attached to your radio. When charging a battery attached to
your radio, your radio must be turned off. The battery charges faster when your radio is turned off.
IMPORTANT:
Use only Motorola Solutions approved-chargers which provide optimal performance. Using
other chargers may fail to fully charge, or can reduce the life of the battery.
Do not charge the battery in a hazardous area.
Do not connect a radio without a battery to the charger.
Procedure:
1 Connect the charger to a power source according to the specification of the charger.
NOTE: The charger must be connected to a power outlet that is nearby and easily
accessed.
2 Depending on the type of charger, use one of the following options:
Option
Using desktop chargers
Using travel or car chargers

Figure 4: Desktop Charger

Actions
a Insert the battery or your radio with a battery into
the slot of the charger.
b Ensure that the battery or radio is connected to the
charger.
c Ensure that the LED indication on the charger
shows that charging is in progress.
a Connect the charger to your radio with the battery
attached.
b Ensure that your radio indicates that charging is in
progress.
MN006360A01-AE
Chapter 4: Getting Started
39