Chapter 34: Over The Air Programming; Receiving Lmr Otap Update; Managing Lmr Otap; Receiving Non-Mandatory Wi-Fi Otap Update - Motorola MXP600 Feature User Manual

MN006360A01-AE

Chapter 34: Over The Air Programming

Chapter 34
Over The Air Programming
NOTE: This is a Software Selling Feature.
Over The Air Programming (OTAP) enables remote radio reconfiguration over TETRA network and
Wi-Fi network.
34.1

Receiving LMR OTAP Update

Prerequisites:Your radio display shows an OTAP prompt with Reboot required. Accept
update? text for a new configuration update.
Procedure:
1 Select Accept to accept or Reject to reject the new configuration update.
NOTE: A timer is set when the prompt is displayed. Request is automatically rejected if
there is no user response to the prompt when the timer runs out.
When the OTAP installation prompt is accepted, your radio updates with the new configuration as
received over OTAP. Visible indication guidance and update status is provided during the update.
When the OTAP installation prompt is rejected, your radio returns to idle mode.
34.2

Managing LMR OTAP

Procedure:
1 From the home screen, press the Menu key.
2 Select LMR OTAP.
3 Select one of the following options:
Option
Update Preference
Last Updated
34.3

Receiving Non-Mandatory Wi-Fi OTAP Update

Prerequisites:Your radio display shows an Wi-Fi OTAP prompt with Reboot required. Accept
update? text for a new configuration update.
Procedure:
Install updates by using one of the following options:
162
Description
Currently only User Confirmation to Update Now is
available.
Shows the last installed LMR OTAP information and
status of the installation.