Advertisement
Quick Links
1060B & 1060BP SERIES
(TOP & BOTTOM OUTLETS)
BLADDER EXPANSION TANKS
INSTRUCTION, INSTALLATION, MAINTENANCE AND REPAIR MANUAL
NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible
party who maintains the system.
Part # A-03-337 | © 2012 Pentair Ltd. | 11/19/12
Advertisement
Related Manuals for Pentair Aurora 1060B Series
Summary of Contents for Pentair Aurora 1060B Series
- Page 1 INSTRUCTION, INSTALLATION, MAINTENANCE AND REPAIR MANUAL NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible party who maintains the system. Part # A-03-337 | © 2012 Pentair Ltd. | 11/19/12...
-
Page 2: California Proposition 65 Warning
SECTION 2 ITEM 1060B DATED NOVEMBER 2012 SUPERCEDES MAY 2010 1060B & 1060BP SERIES 5. Check the tank system connection to be sure nothing is CAUTION obstructing the inlet passageway. Do not remove the drain plug or loosen the nuts on the 6. - Page 3 SECTION 2 ITEM 1060B DATED NOVEMBER 2012 1060B & 1060BP SERIES SUPERCEDES MAY 2010 Before proceeding with bladder replacement, read these 20. Install the factory supplied drain plug, using a liberal amount of Tite-Seal Compound 55 or equivalent. THIS instructions through and check the “Required Tooling and CONNECTION MUST BE ABSOLUTELY AIR- Supplies”...
- Page 4 SECTION 2 ITEM 1060B DATED NOVEMBER 2012 SUPERCEDES MAY 2010 1060B & 1060BP SERIES PLUG DIP TUBE / FLANGE ASSEMBLY DOME SYSTEM CONNECTION VALVE AIR VALVE DRAIN PLUG MARK DOME TUBE FIG. 1 FIG. 2 FIG. 3 STAND ARROW DOME DIAPHRAGM TUBE DIA-...
- Page 5 SECTION 2 ITEM 1060B DATED NOVEMBER 2012 1060B & 1060BP SERIES SUPERCEDES MAY 2010 pitch down to the tank, using air vents as illustrated in the CAUTION sketches. Do not remove the drain plug or loosen the nuts on the 9.
- Page 6 SECTION 2 ITEM 1060B DATED NOVEMBER 2012 SUPERCEDES MAY 2010 1060B & 1060BP SERIES 8. Push the bladder flange into the tank at the system 19. Using soapy water, check the drain fitting threads, air connection. valve, and flange joints for leakage. THIS CONNECTION MUST BE ABSOLUTELY AIRTIGHT.
- Page 7 THIS PAGE INTENTIONALLY LEFT BLANK...
-
Page 8: Warranty
WARRANTY Seller warrants equipment (and its component parts) of its own manufacture against defects in materials and workmanship under normal use and service for one (1) year from the date of installation or start-up, or for eighteen (18) months after the date of shipment, whichever occurs first.