Table of Contents
Advertisement
7. The Console (16) requires four 1.5V "D" batteries
(not included); alkaline batteries are recommended.
IMPORTANT: If the exercise cycle has been
exposed to cold temperatures, allow it to warm
to room temperature before inserting batteries
into the Console. If you do not do this, the con-
sole displays or other electronic components
may become damaged. Press the tab on the bat-
tery cover and remove it. Insert four batteries into
the Console as shown. Make sure that the batter-
ies are oriented as shown by the diagram inside
the battery compartment. Then, reattach the bat-
tery cover.
8. While a second person holds the Console (16) near
the Upright (13), connect the console wire to the
Upper Wire (52). Then, insert the wires downward
into the Upright.
Tip: Avoid pinching the wires during this step.
Attach the Console (16) to the Upright (13) with four
M4 x 15mm Screws (27).
All manuals and user guides at all-guides.com
8
7
Batteries
8
52
13
27
Battery
Cover
16
16
Console
Wire
Avoid pinching
the wires during
this step
Advertisement
Table of Contents
