Table of Contents
Advertisement
5. Turn the Seat Knob (9) counterclockwise and
remove it from the Frame (1). Then, insert the Seat
Post (5) into the Frame. Adjust the Seat Post to the
desired height and insert the Seat Knob through the
indicated hole in the Frame into one of the adjust-
ment holes in the Seat Post. Then, turn the Seat
Knob clockwise until it is tight. Make sure that the
Seat Knob is firmly engaged into one of the
adjustment holes in the Seat Post.
6. While another person holds the Upright (13) near
the Frame (1) as shown, connect the Upper Wire
(52) to the Lower Wire (46). Then, insert the wires
downward into the Frame.
Tip: Avoid pinching the Wires (46, 52) during this
step. Insert the Upright (13) into the Frame (1).
Attach the Upright with three M8 x 20mm Button
Screws (34) and three M8 Split Washers (42).
All manuals and user guides at all-guides.com
7
5
1
6
13
52
46
42
42
34
1
Adjustment
Holes
5
Hole
9
Avoid pinching
the Wires (46, 52)
during this step
34
Advertisement
Table of Contents
