HP Invent XW6200 Installation Manual page 20

345524-B21.book 2 ページ ２００３年８月２２日 金曜日 午後４時６分
Turn on your computer and read the messages that appear during
startup.
If the system recognizes the new drive, information about
the drive displays on the screen and you are prompted to
press F1 to save and continue.
If you are not prompted to press F1, there is a problem with
the installation of the drive, and you need to diagnose the
problem. Start by reviewing the steps in this guide.
Creating a Partition Using Microsoft
Windows 2000
To create a partition for the additional drive using Microsoft
Windows 2000:
1. Log in as Administrator.
2. From the Windows desktop click Start > Settings > Control
Panel.
3. Click Administrative Tools.
4. Click Computer Management.
5. Click Storage.
SATA Hard Drive Installation Guide
All manuals and user guides at all-guides.com
Configuring the Computer
3–2