Trouble Shooting - GE 94906 Instruction Manual

94906 Revised Size 1/21/02

Trouble Shooting

Pr oblem
Indicator light not
blinking when you
press any key
The remote does
not operate your
device
Not performing
commands properly
Problems programming
a TV/VCR Combo Unit
VCR not recording
Channel up and down
do not function on an
RCA TV
Problems changing
channels
2/25/02 4:20 PM
Solution
A) Replace the batteries
(with fresh, new AAA
Alkaline batteries).
B) Check that batteries
are properly installed.
A) Try all the codes list-
ed for your brand.
B) Try the Code Search
method (page 8).
Start Code Search over
again to locate the proper
code.
Try the VCR code for your
brand. Some combo
units, however, may
require both a TV and a
VCR code for full opera -
tion.
As a safety feature on
your remote, you must
press the REC button
twice.
Due to some designs, the
original remote will only
perform these functions.
If your original remote
required ENTER after a
channel, press ENTER
after you select a
channel.
15
Page 16