Setting The Heating And Energy-Save Times And Heating And Energy-Save Temperatures - Silvercrest 368308 2010 Manual

Setting the Heating and Energy-Save
Times and Heating and Energy-Save
Temperatures
The device can be used to set up to nine heat-
ing and energy-save times a day – individually
for each separate day or for several days, e�g� all
workdays, weekend or the whole week�
In the default setting, two heating phases are pre-
programmed�
First stage: 00:00 - 06:00, standard value is 17 °C
•
Second stage: 06:00 - 09:00, standard value is 21 °C
•
Third stage: 09:00 - 17:00, standard value is 17 °C
•
Fourth stage: 17:00 - 23:00, standard value is 21 °C
•
Fifth stage: 23:00 - 24:00, standard value is 17 °C
•
In the case of days which are not programmed,
the preset heating and energy-save times remain
active�
1� Press the Mode/Menu button (5 b) and keep
it pressed until the menu appears�
2� Select the menu option
knob (9) to confirm your selection.
If appears in the display (3) as well as the se-
lected day/range of days� If you want to set an in-
dividual program for a range of days, use the Ro-
tary knob (9) to select the corresponding entry�
3� Select the day/range of days�
Press the Rotary knob (9) to confirm your
selection�
� Press the Rotary
Gi
51