Advertisement
1. XPOWER Air Dancer Blowers are shipped ready-to-use. Before plugging the unit into
the power source, inspect completely for any shipping damage.
2. A support rod (SDSK) for air dancer blowers is designed to stabilize the inflatable air
dancer. Especially for large dancer, the SDSK may need for balance. See page 9 for
assembly.
3. Snugly attach the inflatable dancer around the Velcro strap on the blower housing.
4. Carefully place the Air Dancer Blower unit on a stable, flat dry surface. Lock the wheels
to secure the unit.
5. Plug power cord into a grounded GFCI outlet.
6. Turn the switch to desired speed and make sure unit operates normally.
7. Close supervision is necessary when the unit is used near children. Do not allow children to
play with or around the unit.
TM
Advertisement
