Advertisement
1. To keep the Air Dancer Blower clean, use a damp cloth to wipe the surface of the housing.
2. Never clean the Air Dancer Blower with water.
3. When not in use, unplug and store the Air Dancer Blower in a dry indoor place.
4. Always disconnect the Air Dancer Blower from its power source before performing any
maintenance or cleaning.
Problem
Motor Not Running
Scraping Noise From
Air Dancer Blower
Weak Air Flow
XPOWER's Limited Warranty covers the unit (excludes POWER CORD) from defects in material
and craftsmanship. The Warranty covers normal use for a term of one year from the original
date of purchase including parts, labor, and one way shipping. Non-contiguous states must
pay for roundtrip freight. A purchase receipt must be provided.
Important!
This warranty does not cover or apply to defects due directly or indirectly to misuse, abuse,
disassembly, alteration, corrosive chemicals, improper voltage, fire, flood, negligence,
accident, improperly or incorrectly performed maintenance or repair, or failure to perform
necessary maintenance or repair, or if the use of this product is not in compliance with the
instructions and specifications for its use
For Warranty service and parts replacement (US users only), you must:
A. Call 1-855-855-8868 for a RMA (Return-Merchandise-Authorization) number.
B. Have original proof of purchase.
C. Use the original undamaged packaging or an industrial certified packaging method.
End user will be responsible for shipping the unit (with RMA Number showing on the
shipping label) to the XPOWER Service Department. XPOWER will inspect, assess and advise
the repairs needed and the applicable cost, if any.
For users outside the US, please contact an XPOWER Distributor in your country or region for
Warranty service and parts replacement.
Possible Cause
a) Switch is OFF
b) Faulty switch/cord
a) Check for obstruction entering
through the intake or exhaust
b) Check for any pressure against
blower housing
a) Obstructed vents/inlets
XPOWER Limited Warranty (USA)
Service
Solution
Turn switch ON
Replace switch or cord
Remove obstruction
Remove any pressure
Clean out vents/inlets
Advertisement
