Download Print this page

XPower BR-450 Owner's Manual page 15

Air dancer blower
Hide thumbs Also See for BR-450:

Advertisement

WARNING: IMPORTANT SAFETY PRECAUTIONS! PLEASE READ COMPLETELY BEFORE
USING PRODUCT!
When using electrical appliances, basic safety precautions should always be followed to reduce
the risk of fire, electric shock, and personal injury, including, but not limited to the following:
1. To prevent electric shock, do not operate the unit in standing water. Never plug in or unplug the
unit with wet hands or while standing in water.
2. To avoid risk of injury, do not direct air flow at face or body.
3. Avoid sands, small rocks and other small objects being sucked into the Blower.
4. To reduce the risk of fire or electric shock, do not use unit with any solid-state speed control device.
5. While the Air Dancer Blower is used outdoors, use only with GFCI protected receptacles. Please
contact a qualified electrician for verification and / or installation of a GFCI receptacle if necessary.
6. Indoor use: To reduce the risk of electric shock, do not expose to water. Use only with
grounded plug.
7. Do not operate any Air Dancer Blower with a damaged cord or plug. If the power cord is damaged,
it must be replaced by the manufacturer or its service agent or a similarly qualified person in order
to avoid a hazard.
8. Unplug the Air Dancer Blower from the power supply before servicing or cleaning.
9. This product is not a toy and should only be used for its intended purpose. To reduce the risk of
injury, close supervision is necessary when the unit is used near children . Do not allow children
to play with or around the unit.
10. Do not move or carry the Air Dancer Blower while unit is operating.
Model
Volt / Frequency
Power
Amp
Weight (unit / package)
32.2 Lbs. / 36.8 Lbs.
Speeds
Size (H x W x D)
19 x 19.7 x 17.7 inch
Pull Strap / Wheels
Cord Length
Overheating Protection Thermally Protected Thermally Protected Thermally Protected Thermally Protected
Rated Airflow
LED Lights
Housing
PP / Injection Mold
Safety
Certificates
BR-450
BR-450L
120 V, 60 Hz
120 V, 60 Hz
1 HP
1 HP
8.3 Amps
8.3 Amps
34 Lbs. / 38.4 Lbs.
Two
Two
19 x 19.7 x 19.1 inch
incl
incl
15 Ft.
15 Ft.
5800 CFM
5800 CFM
incl
PP / Injection Mold
BR-460
120 V, 60 Hz
120 V, 60 Hz
1 HP
8.3 Amps
8.3 Amps
32.2 Lbs. / 36.8 Lbs.
34Lbs. / 38.4 Lbs.
Two
19 x 19.7 x17.7 inch
19 x 19.7 x 19.1 inch
incl
25 Ft.
5800 CFM
5800 CFM
PP / Injection Mold
PP / Injection Mold
ETL / C-ETL
ETL / C-ETL
BR-460L
1 HP
Two
incl
25 Ft.
incl

Advertisement

loading

This manual is also suitable for:

Br-450lBr-460Br-460l