Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Biktrix Manuals
  4. Bicycle Accessories
  5. Bigstone C600E V5S
  6. Manual

Biktrix Bigstone C600E V5S Manual

Lcd display
Hide thumbs
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
LCD Display
Control Pad
Display Sections
1: BMS ERROR
• BMS Display Area shows current battery voltage and any error codes which may be
triggering from the bike.
2: Current Power Output
• Shows the current discharging from the battery which corresponds to the amount of
power the bike is using.
3: Riding Mode
• Shows current riding mode. This will change as you use different PAS Levels. Levels 1
and 2 are ECO Mode, Level 3 and 4 are Normal Mode and level 5 is Sport Mode.
4: Battery Level
Bigstone C600E V5S Display Manual
Biktrix Version

Advertisement

loading

Related Manuals for Biktrix Bigstone C600E V5S

Summary of Contents for Biktrix Bigstone C600E V5S

  • Page 1 Bigstone C600E V5S Display Manual Biktrix Version LCD Display Control Pad Display Sections 1: BMS ERROR • BMS Display Area shows current battery voltage and any error codes which may be triggering from the bike. 2: Current Power Output • Shows the current discharging from the battery which corresponds to the amount of power the bike is using.

  • Page 2: Display Operation

    • Shows the remaining battery capacity. Each segment represents approximately 20% of the battery’s capacity. 5: Backlight/Headlight Indicator • Signals if the headlight and display backlight is powered on. 6: Walking Mode Indicator • Icon lights up if walking mode is turned on. 7: Speed Display Unit •...

  • Page 3: Changing Display Settings

    Changing Display Settings Entering the Settings Interface To enter the settings interface press and hold the SET button for 3 seconds. Exit this mode and save your changes by holding down the SET button for another 3 seconds. Reset Trip Distance Set 1 will be displayed.
  • Page 4 You can save any changes and exit this mode by holding the SET key. SOME OF THE SETTINGS IN THE MENU ARE NOT TO BE CHANGED – Biktrix is not liable for any changes being made resulting in corruption of the motor controller or motor functionality.
  • Page 5 Sensor Orientation Setting This setting does not need to be changed. Starting Magnetic Steel Number This setting does not need to be changed. Throttle Binning This setting does not need to be changed. Throttle Speed Limit Changes the speed at which the throttle will function.
  • Page 6 • N: Throttle functions at any speed • Y: Throttle only functions at speeds above 6km/h (4 mph) Slow Start Setting This setting will reduce the acceleration of the bike for a more relaxed ride. 0 will disable this setting with 1 through 3 enabling the setting. At 1 the bike’s acceleration will be reduced from default settings with 3 having the bike’s acceleration much more reduced.

  • Page 7: Error Code Definitions

    Error Code Definitions If there is an error with the motor, motor controller or bike display an error code will display. Consult this key for more information and contact Biktrix Support for further troubleshooting and repair assistance. Error Code Definition...