Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Biktrix Manuals
  4. Bicycle Accessories
  5. 800S
  6. Manual

Biktrix 800S Manual

Display
Hide thumbs
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
Display Interface
Button Definition
800S Display Manual
Biktrix Version

Advertisement

loading

Related Manuals for Biktrix 800S

Summary of Contents for Biktrix 800S

  • Page 1 800S Display Manual Biktrix Version Display Interface Button Definition...

  • Page 2: Normal Operation

    Normal Operation On/Off Switch To turn on the display press and hold the POWER button. To turn off the display press and hold the POWER button again while display is powered on. If the controls are not operated and the bike is not used for 5 minutes (this time can be set) the display will automatically shut down.
  • Page 3 Walk Assistance Mode Press and hold the DOWN button to enter walk assistance mode. The symbol P will be shown in the PAS level area and the bike will move at a speed of 6km/h. To exit this mode press and hold the DOWN button. Battery Charge Indicator This shows the level of charge for the battery.
  • Page 4 Parameter Setting Menu Entering the Parameter Setting Menu Double press the POWER button to enter the parameter setting menu. Press the UP and DOWN buttons to change the current parameter. Press the POWER button to advance to save your changes and advance the next setting. At any time while in this menu double press the POWER button to exit the parameter setting menu.
  • Page 5 Auto off time The speed display will show OFF. Press the UP and DOWN buttons to change the time for the display to automatically turn off when idle. Value ranges from 1 to 9 with that number representing minutes. Press the POWER button to save your changes and advance to the next parameter.
  • Page 6 Password/Speed Limit Setting The speed display will show PSd. You are required to input the password for the display to change the next settings. The default password for this display is “1919”. Use the UP and DOWN buttons to change a digit then press the POWER button to advance to the next digit.

  • Page 7: Error Code Definitions

    The Display will light up the Error Code icon and will also show the error code in the speed display. For what the error code represents consult the table below. Contact Biktrix support if you need assistance in resolving any errors. Error Code...