Advertisement
Quick Links
LCD Display
Control Pad Description
Normal Operation
Power On/Off
Press and hold the POWER button to turn on/off the display. The display will
automatically shut down when there is no operation or riding for X minutes (X can range
from 0-9, default setting is 5)
*If the display has been set to require a password for powering on you will need to input
the correct password before starting.
850C Display Manual
Biktrix Version
Advertisement
Related Manuals for Biktrix 850C
Summary of Contents for Biktrix 850C
- Page 1 850C Display Manual Biktrix Version LCD Display Control Pad Description Normal Operation Power On/Off Press and hold the POWER button to turn on/off the display. The display will automatically shut down when there is no operation or riding for X minutes (X can range...
- Page 2 PAS Level Operation Press the UP button to go up one assist level. Press the DOWN button to go down an assist level. The highest assist level that can be used in 5. Level 0 will give no motor assistance. The number of assist levels can be customized in the user settings. Speed &...
- Page 3 Walking mode (6km) Press and hold the DOWN button to enter walking mode. This will move the bike forward at a speed of 6 km/h. Exit from this mode by releasing the DOWN button. Data cleanup Press and hold the UP and DOWN buttons together for to reset the AVG Speed/MAX Speed/Trip/Time data.
- Page 4 System Press the UP and DOWN buttons to switch between Metric / Imperial. Brightness Press the UP and DOWN buttons to change the brightness of the display backlight. ׀is darkest， ׀׀׀׀׀is the brightest. default value is .׀ Auto off Press the UP and DOWN buttons to change the auto power off time, from 1 to 9.
- Page 5 Battery Ind Press the UP and DOWN buttons to change the battery indicator to either Voltage/Percentage/OFF. *Accurate percentage needs communication with the battery. Pow Ind Press the UP and DOWN buttons to change the Power indicator, Analog/Digital. * This data represents power output of the battery (not motor).
- Page 6 Clock This will set the time of the clock on the display. Press the POWER button to enter the clock setting menu. Press the UP and DOWN buttons to set the Year/Month/Day/Hour/Min/Sec. When you are done setting the piece of time press the POWER button to advance to the next one ie after you set the year press the POWER button to go from Year to Month.
- Page 7 Basic Setting *Press the DOWN button to move the red arrow to Wheel, then press the POWER button to show all items of the Basic Setting. Wheel Press the UP and DOWN buttons to change the wheel diameter used by the controller for speed and distance.
- Page 8 Light Sensor This setting allows you to turn the light sensor on and off. That sensor detects the ambient light and will automatically turn on or off the headlight when it is dark outside. Sensor: Use the UP and DOWN buttons to switch this between ON or OFF. Turning this off will result in the headlights not turning on and off based on ambient light.
- Page 9 Press the POWER button enter the Restore Factory settings item, select YES to restore all parameters to factory settings. Error Code Definitions The 850C display can show warning messages. The engine icon will be displayed on the screen, and error codes are shown at the bottom of the screen. Error codes are from 01~07, for definitions see the table below.