ETC PENKO 1020 FMD Quick Start Manual page 9

1020 FMD
The display indications in menu mode:
Number Description
1 Active buttons for current menu item
2 TAC and CAL code*
3 Menu level
* TAC and CAL code
TAC stands for Traceable Access Code. A number of settings are only available after entering
this code. When these settings are changed, the TAC is incremented with 1.
CAL stands for CALibration code. The calibration settings are only available after entering this
code. When the calibration settings are changed, the CAL is incremented with 1.
9