Introduction; In The Box; Needed For Use - ETC PENKO 1020 FMD Quick Start Manual

1020 FMD

Introduction

The PENKO 1020 FMD is a compact comprehensive Force Measurement Device.

In the box

The box contains the following items:
 1 x 1020 FMD device
 1 x rubber ring for mounting purpose
 2 x clip for mounting purpose
 1 x connector for load cell connection
 1 x quick start manual

Needed for use

To use the 1020 FMD the following items are needed:
 Class 2 or Limited Power Source, rate 18 - 32 VDC, 0.4A@24VDC
 Load cell / Torque sensor
3